MHX-245C C6 Corvette High-Efficiency Triple-Pass Oil Cooler

Out of stock
SKU: MHX-245C
DISCONTINUED
Regular price $699.00
Designed for Vehicles / Universal (no vehicles listed)

DISCONTINUED BY IMPROVED RACING


REPLACED BY THE MHX-248C - Click to view the new cooler.

 

------

Improved Racing's Motorsport Heat Exchanger (MHX) series oil coolers are the result of several years of development and testing to create a highly efficient oil cooler. These coolers were perfected through extensive testing on our in-house heat exchanger test system and wind tunnel. 

The MHX-245C oil cooler is the cooler used in Improved Racing's C5 and C6 Corvette oil cooler kit. Note that this cooler does NOT work with the factory C6 Z51 and Z06 oil cooler lines. It requires aftermarket -10AN oil cooler lines and an oil cooler adapter. If you need a complete kit, see Improved Racing's C6 oil cooler kit, part number EC6-600.

The mounting bungs on the ends of the cooler bolt to the factory mounting locations in the radiator shroud for easy installation. The four mounting bungs on the ends of the cooler are threaded for M8x1.25 mm screws. 

This triple-pass oil cooler surpasses the heat rejection rates of larger, heavier stacked-plate coolers made by brands such as Setrab, Mocal, and Earl's. Compared to a 72-row, 4.5" wide core stacked plate cooler, this cooler is 12% smaller overall and 4% lighter, yet holds more fluid volume. The core is 23% thinner and has a lower row and fin density, allowing more air to flow through the cooler to other heat exchangers (such as a radiator) behind it. 

A major design focus was to minimize welds and brazings to make these coolers stronger, lighter, and less prone to leaks. All four end caps are single-piece CNC-machined billet aluminum. The rows consist of laser-welded, thin-gauge aluminum tubes stuffed with turbulators to maximize heat transfer while minimizing weight. The triple-pass design with long end-tanks maximizes heat transfer efficiency while maintaining a low pressure drop across the cooler. 

The MHX-245C cooler features -10AN male ports on the same side of the end tank for convenient line routing. 

All Improved Racing oil coolers are pressure tested to 175 PSI to ensure no leaks and are rated for continuous operation at 150 PSI. Our coolers are made in the USA and backed by our Lifetime Warranty. 

Features and Benefits

  • Compact, lightweight design is 12% smaller, 4% lighter, and has 104% more fluid capacity than a 72-row, 4.5" wide core stacked plate oil cooler
  • Surpasses heat rejection rates of larger 72-row stacked plate oil coolers
  • Triple-pass design to maximize efficiency
  • Higher pass-through airflow rate than stacked plate coolers
  • -10AN male ports on same side of end tank
  • 4x flanged M8 mounting screws are included
  • Lifetime Warranty
  • Made in the USA

Applications and Fitment

  • 2005-2013 Chevrolet Corvette (C6), all models
  • NOTE: Requires aftermarket oil cooler lines and oil cooler adapter, or use Improved Racing's complete bolt-on oil cooler kit (see part number EC6-600)

Dimensions and Specifications

 

* Dimensions that do not apply to MHX-245C

Part # Rows HP Range Passes Fittings / Ports Weight Capacity Mounting Holes
MHX-245 45 600+ HP 3 -10AN 37° Male Flare 5.1 lb (2.3 kg) 1.95 Qt (1.85 L) M8 x 1.25
MHX-245C 45 600+ HP 3 -10AN 37° Male Flare 5.4 lb (2.6 kg) 1.95 Qt (1.85 L) M8 x 1.25, mounting bung standoffs (not shown)

Specifications

Part #
MHX-245C
Brand
Improved Racing
Part Weight
5.40 lb (2.60 kg)
Primary Material
Aluminum
Finish
Plain
Color
Natural
Construction Type
Flat stuffed tube and fin
Number of Passes
Triple-pass
Core Width
4.5" (114mm)
Core Height
21.2'' (539 mm)
Core Thickness
1.55" (39.4 mm)
Rows
45
Fitting Size
-10AN Male Flare
Test Pressure
175 psi (12.07 bar)
Maximum Operating Pressure
250 psi (17.24 bar)
Maximum Operating Temperature
302°F (150°C)
Minimum Operating Temperature
-40°F (-40°C)
Fluid Compatibility
Coolants
Engine oil
Gear oil
Power Steering Fluid
Transmission fluid
Water
Fluid Capacity
1.95 Qt (1.85 L)
Mounting Hole Size
M8 x 1.25