This is not your run-of-the-mill diff cooler kit using eBay hose and fittings, a tube and fin cooler you can buy at Autozone for $39 and a no name electric fan and pump.
We chose nothing but the highest quality products in this kit. Our name brand pump uses metal gears not plastic. SPAL is a name in fans everyone knows. We chose bulkhead fittings over a hole in the floor with a rubber grommet that works lose over time. Paired with a high-end Mocal cooler actually designed for oil and not transmission fluid. Direct plug in connector for fan & relay takes the guesswork out of wiring up the fan and pump. We also include a one-way anti-drainback valve. The Mocal Fan shroud comes insulated to ensure the most amount of heat is extracted via the SPAL 6.5" suction fan. Rest assured, this is a VERY high quality kit with race-proven performance!
*** Requires Ford Performance Racing Diff Cover or equivalent. Requires 3/8ths NPT (bottom port/feed) and 1/2" top port/feed that is standard on the FPR diff covers. We can modify your stock diff cover for a fee, please add it to comments or email us and we will provide a quote***
*** Assembly Required ***
In order to keep the cost down and pass along as much savings as possible to the customer, this kit does NOT come with pre-assembled fittings. You are required to assemble this kit/fittings and cut the RaceFlux hose to length.
We can offer suggestions and share customer mounting locations but please consider this isn't a direct bolt-on. Drilling and fabrication are required to mount the cooler.
***PRODUCT PHOTOS INCLUDE TEMP SENSOR PROVISION ***
What's in the Box (No Temp Sensor Provision)
- (1) Mocal 25-row x 235 mm oil cooler, -08AN
- (1) 25-Row Mocal 235 Matrix and Setrab Series 6 Oil
Cooler Fan Bracket Kit For 6.5" Fan
- (1) SPAL fan, 6.5", suction, low profile, 325 CFM
- (1) SPAL fan harness kit, 40A relay, 12V
- (5) Hose end, double swivel, 90-degree, -08AN,
- (6) Hose end, straight, -08AN, black
- (1) Hose end, double swivel, 45-degree, -08AN,
- (2) Bulkhead fitting, straight flare, -8AN to -8AN
- (2) Bulkhead fitting NUT, -8AN, hard anodized, black
- (1) Marco UP2 Electric gear oil pump, 12V, 52.9 GPH / 0.88
GPM, 2.3-2.7 A, 3/8" NPT ports
- (1) Union, 3/8" BSP male to -8AN male flare, black (Oil Cooler Fittings)
- (12)(feet) SAE J30 R9 lightweight racing hose, Nylon outer
braid, SS reinforced, Viton (FKM) inner bore,
- (1) Union, 1/2" male NPT to -08AN male flare, black (Return, Ford Racing Diff Cover)
- (1) Union, 3/8" male NPT to -08AN male flare, black (Feed, Ford Racing Diff Cover bottom port)
- (1) One way -8an check valve, to prevent fluid drain back into the diff
- (1) 6amp double pole switch
Add Temp Sensor Provision Includes
- (1) Tee, -08AN male flare with 1/8" NPT female sensor port, black
- (2) Hose end, straight, -08AN, black