RaceFlux Lightweight Nylon Braided Viton Hose for Fuel and Oil, -10AN
Couldn't load pickup availability
RaceFlux's RH1 lightweight racing hose is 33% lighter than stainless braided hose and much easier to assemble and work with. This 4-layer hose is SAE J30 R9 rated and features a Viton Fluoroelastomer (FKM) inner layer for compatibility with nearly all automotive fluids including fuel, engine oil, gear oil, transmission fluid, coolants, water, air and vacuum.
This hose is NHRA approved and can be found on the NHRA approved product list.
Certified for use with racing fuels, ethanol-based fuels (E85+), diesels/bio-diesels, methanol, and ethanol/gasoline mixtures. This hose will not deteriorate, dry, harden, or permeate fuel (emit fuel vapor) with the presence of ethanol in gasoline.
For use with RaceFlux brand and other traditional AN fittings. Sold by the foot.
Features and Benefits
- -10AN size
- NHRA Approved
- 0.56" ID, 0.79" OD
- Color is black with a gray trace
- SAE J30 R9 rating
- 33% lighter than traditional stainless steel braided hose
- Lightweight, abrasion-resistant Nylon outer cover
- Smooth bore Viton FKM fluroeslastomer rubber inner layer composed of vinylidene fluoride (VDF), hexafluoropropylene (HFP) and tetrafluoroethylene (TFE) with a high fluorine content for excellent chemical resistance
- Reinforced with a lightweight embedded stainless steel inner braid for use in vacuum applications
- -40°F (-40°C) to 302°F (150°C) operating temperature
- 300 PSI max operating pressure
- 1,000 PSI burst pressure
- For use with traditional reusable AN fittings (not for use with push-on style barbed fittings)
- Note: This hose should not be submerged in fuel or used inside of fuel tanks
| Hose Size | Inner Diameter | Outer Diameter | Min Bend Radius |
| -6AN | 0.35'' | 0.55'' | 2.25" |
| -8AN | 0.45'' | 0.65'' | 3.5" |
| -10AN | 0.56'' | 0.79'' | 4.0" |
| -12AN | 0.70'' | 0.96'' | 4.5" |
Specifications
| Part # | RH1-10
|
|---|---|
| Hose Size | -10AN
|
| Size | -10AN
|
| Brand | RaceFlux
|
| Hose Series | Braided (RH Series)
|
| Fitting Series | Braided Rubber Reusable (D Series)
Braided Rubber Crimp (C Series) |
| Color | Black with Gray Trace
|
| Hose Style | AN Reusable Standard
|
| Applications | Breather and vent lines
Fuel (outside of tank) Gauge and sensor lines Vacuum lines Other oil water and air systems |
| Fluid Compatibility | Air and gas
Alcohol Coolants Engine oil Ethanol-based fuels (E85+) Ethanol/gasoline mixtures Gear oil Methanol Nitrous Oxide Power Steering Fluid Racing fuels Transmission fluid Vacuum Water |
| Standards & Certifications | Permeation rating per SAE J30 R9
|
| Conductive (Anti-Static) | Yes
|
| Inner Diameter (I.D.) | 0.56"
|
| Outer Diameter (O.D.) | 0.79"
|
| Outer Cover | Abrasion-Resistant Nylon Braid
|
| Inner Bore Material | Fluoroelastomer (FKM)
|
| Reinforcement | Stainless Steel Braid
|
| Minimum Bend Radius | 4.0" (102 mm)
|
| Minimum Operating Temperature | -30°F (-34°C)
|
| Maximum Operating Temperature | 302°F (150°C)
|
| Maximum Operating Pressure | 300 psi (20.68 bar)
|
| Vacuum Rating | 27 in/Hg (914 mbar)
|
| Burst Pressure | 1000 psi (68.94 bar)
|
| Part Weight | 1.89 oz/ft
|